The XL1 by Volkswagen is the most efficient production car in the world with a fuel consumption of 0.9 l\/100km. Thanks to its plug\u00adin hybrid system, the two seater can also be driven for up to 50 kilometers locally in pure electric mode, i.e. with zero emissions at point of use. The XL1 is an automotive hero that follows pure sports car design principles: low weight (795 kg), perfect aerodynamics (Cd 0.189) and a low center of gravity (1,153 mm high). This gives the efficient Volkswagen the ability to cruise on the road at a constant speed of 100 km\/h using just 6.2 kW \/ 8.4 PS. In all electric mode, the XL1 requires less than 0.1 kWh to cover a driving distance of over one kilometer.<\/p>\n
<\/p>\n
Efficiency and driving fun:<\/p>\n
High-tech lightweight construction, perfect aerodynamics and the plug\u00adin hybrid system \u2013 consisting of a two cylinder TDI engine (35 kW \/ 48 PS), E\u00admotor (20 kW \/ 27 PS), 7\u00adspeed dual clutch gearbox (DSG) and lithium-ion battery (capacity: 5.5 kWh) \u2013 enable the new Volkswagen XL1 to emit a mere 21 g\/km CO2. If needed, the XL1, which reaches (electronically limited) 160 km\/h, accelerates from 0 to 100 km\/h in just 12.7 seconds.<\/p>\n
<\/p>\n
Third evolutionary stage of a vision:<\/p>\n
Conceptually, the XL1 represents the third evolutionary stage of Volkswagen\u2019s 1\u00adlitre car strategy. When the new millennium was ushered in, Prof. Dr. Ferdinand Pi\u00ebch, who is today Chairman of the Supervisory Board of Volkswagen AG, formulated the visionary goal of bringing to market a production car that was practical in everyday use with fuel consumption of one liter per 100 km. In the two seats XL1, this vision has become reality. Despite the very high levels of efficiency of the XL, developers were able to design a body layout that offers greater everyday practicality than in the two previous prototypes: While the driver and passenger sat in a tandem arrangement for optimal aero\u00addynamics in the L1 \u2013 the 1\u00adlitre car presented in 2002 and in 2009 \u2013 in the new XL1, two occupants sit side by side, slightly staggered but almost like normal.<\/p>\n
<\/p>\n
Shorter than a Polo, lower than a Porsche Boxster:<\/p>\n
The XL1 is 3,888 mm long, 1,665 mm wide and just 1,153 mm tall. These are pretty extreme measurements if you go by familiar passenger car standards. By way of comparison: The Polo has a similar length (3,970 mm) and width (1,682 m) but is significantly taller (1,462 mm). Even a full blooded sports car like the latest Porsche Boxster is still 129 mm taller (1,282 mm). The presence of the XL1 is correspondingly spectacular \u2013 a car of the future, built in the present day.<\/p>\n
<\/p>\n
CFRP and aluminum dominate. Not only are the XL1’s technologies pioneering but also the fact that Volkswagen is producing large parts of the XL1 in lightweight and strong carbon fiber reinforced polymer (CFRP). The monocoque with its slightly offset seats for driver and front passenger, all exterior body parts as well as functional elements such as the anti\u00adroll bars are all made of CFRP. The preferred CFRP components at Volkswagen are those produced in the RTM process (Resin Transfer Moulding). The density of this material or its specific gravity is merely around 20% that of a comparable steel exterior skin. The CFRP parts exhibit a level of stiffness and strength that is by no means inferior to that of comparable steel or aluminum parts, yet the exterior skin of the XL1 is merely 1.2 mm thick.<\/p>\n
<\/p>\n
A look at the scales shows why CFRP is the ideal material for the body of the XL1. The Volkswagen weighs just 795 kg. Of this figure, 227 kg represents the entire drive unit, 153 kg the running gear, 80 kg the equipment (including the two bucket seats) and 105 kg the electrical system. That leaves 230 kg, which is precisely the weight of the body \u2013 produced largely of CFRP \u2013 including wing doors, front windscreen with laminated glass technology and the ultra-safe monocoque. A total of 21.3% of the new XL1, or 169 kg, consists of CFRP. In addition, Volkswagen uses lightweight metals for 22.5% of all parts (179 kg). Only 23.2% (184 kg) of the new XL1 is constructed from steel and iron. The rest of its weight is distributed among various other polymers (e.g. polycarbonate side windows), metals, natural fibers, process materials and electronics.<\/p>\n
<\/p>\n
<\/p>\n
Thanks to CFRP, the XL1 is not only light in weight but very safe as well. This is due in part to the high strength and yet lightweight CFRP monocoque. In an emergency, it provides driver and passenger with the necessary survival space. The intelligent design of the load paths, including the use of sandwich structures in the monocoque, is responsible for this. In addition, the aluminum structures of the front and rear sections absorb the majority of the impact energy. These principles were likewise implemented in the design of the CFRP doors, where an aluminum absorbing beam is responsible for the absorption of the energy; moreover, a stiff CFRP door frame minimises the intrusions into the CFRP safety cell. The rescue of the passengers was also given a great deal of attention: In case the XL1 overturns and comes to a rest on the roof, pyrotechnical separating screws facilitate the opening of the doors (swing doors).<\/p>\n
<\/p>\n
XL1 embodies what is feasible today. The new XL1 is currently the most fuel efficient and eco\u00adfriendly automobile in the world. The only reason that this vehicle could be built is because the limits of what is feasible both in terms of the technologies utilized and the manufacturing method were redefined. Consider XL1 technologies: Volkswagen is implementing the most innovative systems and materials that offer the highest efficiency possible today. Consider XL1 manufacturing: In Northern Germany, Europe\u2019s largest carmaker has set up a completely new handcrafting like production for the XL1, which consists largely of CFRP.<\/p>\n
<\/p>\n
Manufacturing in Osnabr\u00fcck. The XL1 is manufactured by Volkswagen Osnabr\u00fcck GmbH. In the former Karmann plants there, around 1,800 employees produce such cars as the Golf Cabriolet and the new Porsche Boxster. However, in the small production series for the XL1, the specialists from Osnabr\u00fcck are not pursuing the classic path of large scale production; instead they are practicing automotive handcrafting. As is usual<\/p>\n
in the framework of mass-produced vehicles like the Golf Cabriolet, many components \u2013 such as the monocoque, engine, motor, suspensions and battery \u2013 are supplied by other plants and external suppliers. Nonetheless, the XL1 production processes implemented<\/p>\n
in Osnabr\u00fcck are highly innovative and unique worldwide. There are no previous examples of the individual production steps anywhere in the world, because no other car has been produced so thoroughly in a similar composite material. On a long term basis, other Group brands will also benefit from the numerous innovations implemented in the XL1.<\/p>\n","protected":false},"excerpt":{"rendered":"
The XL1 by Volkswagen is the most efficient production car in the world with a fuel consumption of 0.9 l\/100km. Thanks to its plug\u00adin hybrid system, the two seater can also be driven for up to 50 kilometers locally in pure electric mode, i.e. with zero emissions at point of use. The XL1 is an […]<\/p>\n","protected":false},"author":2,"featured_media":193,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[17],"tags":[386,385],"acf":{"country":["uae","kuwait","ksa","bahrain","qatar","oman"],"sub_title_for_this_post":"","youtube_video_identifier":"","excerpt_for_this_post":"","gallery":null},"yoast_head":"\n